Masterarbeiten
Ajay Pinate, 2022
“Wide-field peripheral refraction wavefront laser scanning”
Yanqiu Li (B.Sc.), 2022
“Development of diffractive optical elements for imaging application”
Priyal Narola (B.Sc.), 2022
“Process development using ultrafast laser burst mode micromachining for high ablation rate and quality aspect of non-metal material”
Huajun Zhang (B.Sc.), 2022
“Characterization of Metal-Organic Framework-Coated Waveguides for Gas Sensing”
Zhiyao Yang (B.Sc.), 2022
“Image enhancement by focus stacking and bracketing for non-contact dermoscope with tunable liquid lens”
Babar Muaz (B.Sc.), 2022
“Development of a Deep Learning Based Intelligent Skin Disease Classification System from Non-Contact Dermoscopy Images”
Abhishek Suriya (B.Sc.), 2022
“Construction, Realization, Simulation and Characterization of Embedded Glass Waveguides with Beam Combiner Structures for RGB Laser Light Engine”
Manishkumar Pandey (B.Sc.), 2021
“Productivity analysis for USP single beam processing of thin metallic foils”
Chen Hu (B.Sc.), 2021
“Development of a compact and low-cost optical sensor applicable for the detection of 3D-AFM signals”
Vivek Vardhan Reddy Gurrala (B.Sc.), 2021
“Simulation of the imaging quality of an optical lithography system”
Xin Ouyang (B.Sc.), 2021
“Hybrid Integration of InP Semiconductor Optical Amplifier and Si Arrayed Waveguide Grating”
Yang Fei (B.Sc.), 2021
“Automatisierung und Optimierung von 3D Rekonstruktionen für die Humanhautbildgebung”
Kunal Kushwaha (B.Sc.), 2021
“Splitting of self-written waveguides using thin film filters for photonic networks”
Hardik Kumar Gadher (B.Sc.), 2021
“Tip convolution effects and their deconvolution in photo-induced force microscopy”
Pranavkumar Chauhan (B.Sc.), 2021
“Characterization of a high-speed autocollimator”
Rushabh Akolia (B.Sc.), 2021
“Opto-Mechanical System Simulation of a Barcode Scanner combined with Wave-Optical Simulation of Laser Modules regarding Depth of Reading Field”
Pengfei Yin (B.Sc.), 2021
“Frame Interpolation using Neural Networks for Motion-Compensated Prediction in VVC”
Thamarai Kannan Thamil Selvan (B.Sc.), 2021
“Development of an optical coherence tomography system using adaptive optics to reduce aberrations in laser material processing applications”
Hunain Farooq (B.Sc.), 2021
“Determination of optical properties from spatially resolved diffuse reflectance”
Saad Bin Saleem (B.Sc.), 2021
“Scanner system for verification of material locations in a warehouse management system”
Ramesh Vantaku (B.Sc.), 2021
“Investigating phase shift and roughness on gauge blocks using a Newton’s rings method”
Karthikkumar Murali (B.Sc.), 2021
“Development of a 2D triangulation setup for in-situ sample surface measurement during high power laser penetration”
Abhishek Nanda (B.Sc.), 2021
“Two-Dimensional Plasmonic Devices for Light Manipulation”
Muhammad Wajahat Raheel (B.Sc.), 2021
“Development of Automatic Optical Inspection System for Fault Detection in Light Emitting Diodes”
Jaya Bharathi Guttula (B.Sc.), 2021
“Three Dimensional 5-to-1 Coupler for Polymer-Optical Fibre”
Prashant Khandelwal (B.Sc.), 2021
“Analysis and Optimization of the Functioning of a Digital Light Collecting System for Automotive Headlights”
Murat Baran (B.Sc.), 2021
“Comparative analysis of simulated and experimentally fabricated self-written waveguides”
Savan Ghevariya (B.Sc.), 2021
“Simulation-Assisted High-Speed Multi-Beam Laser Direct Laser Interference Patterning”
Nikunjkumar Jaysukhbhai Adroja (B.Sc.), 2020
“Hyperspectral imaging system for inline contamination localization”
Nikunjkumar Adroja (B.Sc.), 2020
"Hyperspectral imaging system for inline contamination localization"
Tobin Kurian (B.Sc.), 2020
"LCoS-SLM characterization and integration in an interferometric instrument"
Chunxiao Mu (B.Sc.), 2020
"Development of a microscope projection photolithography system for optical microstructuring"
Sanket Patel (B.Sc.), 2020
"Development of a portable micro-optical viscometer"
Anyanwu Martins (B.Sc.), 2020
"Chromophore transition normals"
Woheeb Muhammad Saeed (B.Sc.), 2020
"Design of diffusive projection screen for laser-based automotive stop lamps"
Mohammed Bin Al-Shaibah (B.Sc.), 2020
"Dye Doped Polymer Optical Fibre Laser"
Lianzhi Wen (B.Sc.), 2020
"Untersuchung der Schmelzbaddynamik und des Benetzungsverhaltens beim spaltüberbrückenden Laserstahlmikroschweißen"
Kiana Farajzadeh (B.Sc.), 2019
"Vertical coupling strategies for homogeneous flat panel illumination"
Kevin Wiegmann (B.Sc.), 2017 - 2018
"Untersuchung von optischen Koppelelementen für planar-polymeroptische Lichtwellenleiter"
Thomas Hildebrandt (B.Sc.), 2017 - 2018
"Design, simulation, and construction of an illumination unit for non-contact dermatoscopy"
Yulong Zheng (B.Sc.), 2016
"Schreiben von Faser Bragg Gittern in polymer-optische Fasern für sensorische Anwendungen"
Jonas Kanngießer (B.Sc.), 2015 - 2016
"Pyro- und piezoelektrische Antwort dünner PVDF-Folien auf kurze Laserpulse"
Nikhita Reddy Dodda (B.Sc.), 2015 - 2016
"Advanced Solid-state light Sources: Measurement and characterization"
Moritz Hinkelmann (B.Sc.), 2015 – 2016
"Amplification of femtosecond laser pulses to mJ level based on Yb3+ thin-disk regenerative amplifiers”
Torsten Uekermann (B.Sc.), 2015 – 2016
“Simulation und Auslegung diffraktiver Optiken zur Lichtformung für Rückleuchten in Automotivanwendungen”
Felix Wellmann (B.Sc.), 2015 – 2016
“Development of an Attenuated-Total-Reflection Spectrometer for Downhole Detection of Dissolved Gases in Drilling Fluid”
Maximilian Ihme, 2014-2015
"Automatisierung einer maskenlosen Belichter-Einheit und Entwicklung einer Grautonlithografie zur Herstellung holographischer Mikrooptiken"
Dirk Schmidt (B.Sc.), 2014-2015
“Untersuchung von Wellenleiterstrukturen mittels optischer Frequenzbereichsreflektometrie”
Daniel Müller (B.Sc.), 2013 – 2014
“Design, construction and characterization of a solar concentrator utilizing a pneumatically deformable parabolic membrane mirror and a stationary receiver with heat storage capability”
Christian Suhr (B.Sc.), 2013 – 2014
“Modellierung und Entwicklung eines IR-LED basierten Methansensors”
Sebastian Schlangen (B.Sc.), 2013 – 2014
“Bildgebung mit polarisiertem Licht in einem kontaktlosen Dermatoskop”
Yi Wu (B.Sc.), 2013 “Raytracing-Simulation von planaren Lichtwellenleitern, Koppelstrukturen und Sensoren”
Axel Günther (B.Sc.), 2012 - 2013
“Aufbau und Charakterisierung eines optischen Systems zur Fernfeld-Dermatoskopie”
Xiaogang Yuan (B.Sc.), 2012 - 2013
“Charakterisierung und Kompensation von Temperatureinflüssen in der konfokalen Ramanmikroskopie von nativen mikrobiellen Proben”
Chandriand Teuntchou Noumeni (B.Sc.), 2011 - 2012
“Polyvinylalkohol als Gewebephantom - Herstellung, Einbettung von Carotinoiden und spektroskopische Charakterisierung”
Bachelorarbeiten
Julia Locmelis , 2019
"Gold-Nanopartikel verstärkte Oberflächenplasmonresonanz”
Marian Bleul, 2017 - 2018
"Hot-Embossed Single-Mode Polymer Waveguides: Production and Characterization"
Marco Schultz, 2017 - 2018
“Numerische Implementierung eines elektromechanischen Finite-Difference Schemas zur
Vorhersage optoakustischer Nahfeldtransienten”
Lukas Hiller, 2017
“Design und Implementierung eines optischen Aufbaus für UV-Lithographie basierend auf einem Spatial Light Modulator”
Tyrone Green, 2017
"Entwicklung und Implementierung eines Signalverarbeitungsalgorithmus für Smartphone-gestützte Oberflächenplasmonensensoren"
Khodor Sleiman, 2017
“Parameterstudie zur Herstellung von Oberflächengittern als Koppelstrukturen für Polymerwellenleiter”
Daphne DeTemple, 2015 - 2016
“Optische Charakterisierung von Rundfenstermembranen ex vivo”
Maurice Menßen, 2015
"Untersuchung von planar-optischen Ober ächenplasmonensensoren"
Kevin Wiegmann, 2015
“Entwicklung eines durchstimmbaren optischen Bandpassfilters”
Andreas Kraus, 2014
“Entwicklung eines UV Belichters für die Herstellung optischer Wellenleiter”
Mira Heucke, 2013 – 2014
“Kamerabasierte Gesichtserkennung zur Insassenidentifikation im Fahrzeug”
Felix Wellmann, 2013
“Konzeptionierung eines Sensormoduls zur Methandetektion in der Tiefbohrtechnik”
Yingying Zhang, 2012 - 2013
“Simulation von Membranverformungen und -schwingungen unter Berücksichtigung unterschiedlicher Materialmodelle"
